Genzler Bass Array Series 2 Slant Cab 2×10 and 4×3 Array Bass Cabinet
Genzler Amplification is proud to announce the New Series 2 version of all their popular and innovative Bass Array® compact cabinet designs. Based upon the overwhelming success and popularity of the original BA210-3SLT cabinet, the Series 2, BA2-210-3SLT features:
- All New Italian Designed Loudspeakers
- Increased Power Handling
- Broader Frequency Response, with more detail and mid-range definition.
- Extended Top-End Clarity
- Overall Lighter-Weight Cabinet
The BA2-210-3SLT (slanted version) further enhances the benefits of the BA concept utilizing a 6-degree slanted baffle, adding a new level of dispersion and projection, either when being used as a single enclosure or in combination with the straight BA2-210-3STR, BA-2-410-3 or additional slanted BA cabinets. This offers multiple options to the player to configure their stack for the best coverage of the stage and performance venue.
With these new enhancements, the Bass Array Series 2 models continue to deliver the dynamic next generation of these remarkable and innovative bass cabinets.
FEATURES
- Full, deep, low frequency response from the high efficiency 10 in. woofers — doing what they do best.
- Smooth, seamless, clear, and articulate mid-range to high frequency transition across the audio spectrum.
- Broad horizontal dispersion far exceeding conventional woofer/tweeter combinations.
- Eeven more advancements with increased power handling, broader frequency response, more detail, mid-clarity, definition, and extended top-end, all in an even lighter-weight cabinet.
- Neodymium 10 in. Woofers w/4 x 3 in. Neodymium Line Array Drivers
- Ported Cabinet Design
- Slant Cabinet Built w/Lite-Ply & Baltic Birch Plywood
- Side Mounted, Metal, Recessed Handles
- Dual Speakon and 1/4 in. Input Jacks
SPECIFICATIONS
- Power Handling: 600 Watts
- Frequency Response: 40-18 KHz
- Sensitivity 1W/1M: 100 dB
- Nominal Impedance: 8 ohm
- Crossover Frequency: 800 Hz
- Weight: 32 lbs.
- Dimensions (HxWxD): 16 x 23 x 19 3/8 in.
Speaker Components
- Two Premium Neodymium 10 in. loudspeakers utilizing a fiberglass former voice coil with a unique dual-wound (inside/outside winding) design for increased power handling and thermal capacity.
- Four Premium Neodymium 3 in. full-range, mid/high cone drivers utilizing a fiberglass former voice coil, a unique dual-wound (inside/outside winding) design for increased power handling and thermal capacity. These drivers are loaded into a sealed line array stack.
Input Panel/Crossover Network
- Custom designed 6 dB/octave slopes in balance with the acoustical controls of each enclosure.
- Two Speakon NL-2 connector and two 1/4 in. sealed jacks; to reduce rear cabinet air loss and noise.
Cabinet
- Slant Cabinet Built w/Lite-ply & Baltic Birch Plywood
- Heavy-duty Textured Black Vinyl
- Black Metal Corners and Heavy-duty Metal Recessed Handles
- Custom, Curved Grille with a unique center “pleat” to protect the array column.
- Large Rubber Feet
